'My favorite looking shotty. I want to mount a red dot on my DE SPAS like this but I don't want to drill into the internals.';

'>>195421
Well you don't have too you can just glue it too the body, here is a file if you have/know someone with a 3D printer

https://www.thingiverse.com/thing:4406719';

'field had a strange guy this week
>For the first half, just played normally
>Then after lunch, he started doing weird shit
>Would sneak up right behind people
>Then tap them on the shoulder, say "watch this" and shoot himself
>Did this to several different folks
>Capstone was when he snuck behind an enemy squad, had a clear drop on them all
>He shouts "oh shit, too many enemies!"
>Waves at them when they turn around, shoots himself before any of them can
>Walks off the field holding his kill rag up
Wtf';

'>>195489
I do this when I take my main to newbie zones.';

'Did you have fun today anon?';

'>>195489
All pastimes attract spergs, but maybe airsoft attracts more than most.

>>195693
I've fucked up my knee, so no games for me atm.';

'>playing bb gun war yesterday
>see small building with about five enemy players sitting down behind it
>can't see everyone, but it looks like the majority are dead
>sprint up around the corner, gun at the ready
>don't shoot immediately because I don't want to hit people who are already out at close range
>somebody yells "we're all dead!"
>lower weapon
>90lb kid in the middle of his wiped squad pulls a pistol from a chest holster and pops me in the chest
>"Not me! I'm not dead!"
>MAD
>respawn and get back to the building ASAP
>sprint around the corner full gas
>rapid firing before I can even register what I'm shooting at, don't care who I hit
>everyone except the kid has left
>blast his skinny ass multiple times at ~12ft
>"HEY HEY HEY I'M OUT I'M OUT COME ON!"
>I see that he already had his kill rag on
>"exactly" the situation I was trying to avoid in the first place
I think this is a perfect example of how dumb try-hard behavior breeds more dumb try-hard behavior, and how everyone has less fun because of it. That kid shouldn't have used a pile of his dead squadmates as a human shield to try and "win" by using my reluctance to physically hurt my peers against me, and I should have exercised more tact and restraint when reengaging.
Were lessons learned? Probably not, but I still had fun.';

'>>195693
yeah';

'>>195698
Yeah, I often find kids react poorly to those kind of situations. Same thing: pop around barrier, offer kids bang kill, one panics and blasts me point blank range. Now I just pop everyone once in the chest or gear so there's no misunderstanding.';

'>>195698
I had a similar situation yesterday. I was waiting behind some stairs to get a guy coming down and I hear "dead man coming down stairs". So I don't shoot when he's down until I see a second coming down and that is the dead man. Me and the first guy then trade. Shoot first, ask questions later is the lesson I learned.';

'>>195698
>be me
>at cqb game in an old office building
>just respawned
>making my way back to where the fighting is going on
>enemy player walks out of a door 10m in front of me
>he's not paying attention so I get an easy kill
>decide fuck it, Im using that door too
>play it safe and keep gun at a low ready
>round the corner
>5 guys stacked up on the door
>ohshitohfuck.jpeg
>they're as surprised to see me as I am them
>magdump into the group
>get the first 2 guys, didnt get the rest because human shields
>get shot myself
>apologise to the first 2 guy in line, for all the shots I dumped on them
>head back to spawn';

'>>195698
Had this almost happen to me, fortunately I was 40 meters away and behind a wall so the bloat lord's shots missed, finished him off and got a full squad wipe.';

'>>195757
That's not so bad, it just sounds like you had a good play. Sucks for the guys you overshot, but it's understandable, especially in a CQC environment. They knew what they signed up for.';

'>>195726
That is bullshit dude. It sounds like they knew you were there and did it intentionally, idk why else a live player and a dead one would move together.';

'>new CQB field opens in my city
>excited as I haven't played in 10+ years
>see YouTube video I on opening day at said field
>guy is running a chinese PEQ laser constantly on the entire time
>shining it in people's eyes
Wellllll god dammit.';

'>>195912
I would contact the field and tell them about this. They might simply be unaware of the fact and most likely simply forgot to ban lasers. I doubt lasers being allowed is a conscious decision on their side.';

'are there any guns that don't look like guns? Kinda like the way paintball markers just look unique';

'>>195912
Pretty sure that guy is breaking the rules, unless that field is run by anarchists.
>>195955
There are a bunch of gay looking speedsoft guns nowadays. Now go back to the paintball thread and don't come back.';

'>>196012
touched a nerve I see';

'undefined';

'>>196015
We don't take kindly to your types 'round here';

'>>195955
I have one of those but the upper I made myself';

'Talk me out of buying cyma thompson.';

'>>196047
depends is it the cybergun one or the cyma one? The Cybergun one has some internal upgrades, but the CYMA one i had ootb was absolutely awful desu. Like plastic piston and plastic bushings.. I had to swap everything in it before it was usable, and then it did turn into quite the gun.

I can't remember all the parts in it but some of it was ASG Infinity 22TPA, 13:1 SHS Gear, changed all air seal parts + piston. SHS makes a Thompson nozzle. Iirc the cylinder head is a V3 but don't quote me on that. Perun AB++ precock set to 3. Barrel, bucking and nub was Maple leaf. I had to remove some material on the hop arm otherwise there would be hop even at zero.

It's a fun project gun if you like that kind of stuff

>>>/wsg/5533240';

'>>195359
are original tokyo marui spas 12s' worth anything? i lost the j hook part but i just have the fold out stock

i got it originally 2nd hand from facebook around 2013, and i heard usairsoft talk about it having some significance in rarity but i'm not too active the airsoft space anymore lmx24o';

'>>196022
I saw one guy on my field rocking one of these alongside a white construction helmet and a hi-vis vest. When I approached him and asked about his getup he told me he was a tactical construction worker. I'm not shitting you.';

'>>196049
Cyma, and from what i've heard they changed bushings to metal in newer releases, not sure though.';

'>>196052
if it means they changed the rest of the internals to CYMA blue standard that's alright at least. Still not really amazing, but it depends what you care about.';

'>>196047
it's FARB';

'>>196036
this but unironically';

'>>196060
why u haf to be angry is only gaem';

'>>196036
i'm not a paintballer so you're alright, you cliquey homosexuals
>>196045
neat, how expensive was it to build? I'd like something that looks like a PB marker like yours, or a power tool. Hell i'd even take something that looked kinda sci-fi. Basically anything but a /k/ larp. Just to keep the most autistic and fat spergs from trying to talk to me.';

'>>196095
Tacticool powertools or gundam would work but if it is scifi related to a specific series those attract some extreme cringe.';

'>>196096
Oh yeah, certainly don't want some sperg trying to strike up a conversation about some geeky shit either. Oh well, doesn't seem to be a market for it.';

'>>196095
the most costly part is the HPA setup. Mine has a Polarstar F2, then you'd need a HPA tank setup as well. Other than that it's a lower of your choice, carbon tube from aliexpress and a 3D printer for the upper receiver. If you don't want to make something yourself Airtac Customs sells them premade both AEG and HPA in the US. In the EU there¨'s something like the Sub5';

'>>196101
Really cool anon, thanks. Well out of my price range as someone looking to get into it. Puts me on the right track at least.';

'>>196116
Cheaper option would be an AAP-01 with a kit either premade or 3d printed. Like this one I finished recently';

'>>196124
That almost looks cool.';

'The entire idea is counter intuitive. If you showed up to a field with any of those things above you'd have people asking you about it constantly-- "what brand is that? how does it work? what's the performance like?"

You're better off with a basic M4 with 100% stock externals if you don't want to attract attention.';

'>>195955
DELETE THIS

>>196022
>>196051
I'll allow this.';

'>>196151
trannies are attention whores';

'>>196203
Wait, no, what? That can't be a tranny, I already fapped over it.';

'>>195359
Just ordered a WE Luger, knowing that is a pos, I just want an evil pistol.';

'>>196151
dunno';

'>>196232
why not something like this?';

'>>196232
Pistols are mostly decorations anyways in this. Btw use propane since every we pistol I've used has been picky on green gas but works better with just straight propane.';

'>>196237
Is that the new VFC one?';

'>>196249
not sure found this one on the internet';

'>>196249
this one is';

'Playing in WWII gear when it's 28 degrees and sun wasn't easy but still a lot of fun. Always extra satisfying when you manage to take out people with SMGs using a bolt action rifle';

'I have absolutely no use for this, but I want one.';

'>>196571
look at the north african kits
they would be better fir the heat';

'>order PDI M120 equivalent spring
>supposed to make 1.5J of power
>install it
>only getting 1.2-1.3J
>tweak several things trying to identify the air leak
>nothing works
>finally decide it must be the spring itself
>order SHS M120 equivalent spring
>supposed to make 1.5J of power
>install it
>2.1 fucking joules
I fucking hate BB guns';

'>>196647';

'>>196612
The Afrika korps kit is almost completely different from the regular ones so it'd be too costly for something that's not even very high on my wishlist. Maybe if I win the lottery or something.';

'Hello 4chan,

I am planning on creating an integrally suppressed A&K ACR, but I want to get the Begadi hop-up unit to utilize higher BB weights. This part is only in Europe, and I can't find anyone in the US who supplies it.

Luckily, my family vacation is going to Sweden, which will save me around 22 USD on shipping. The question is, will TSA/Customs kill me for trying to bring across a hop-up system?';

'>>196750
Why do you type like some kind of fed?
A hop up unit isn't big and doesn't look like anything obvious. If they just toss it in their suitcase I doubt anyone would notice it, or care at all.';

'>>196647
Anon, unironically, learn to make your own springs, it's really easy to do! If you're interested I can give you a brief writeup.';

'>>196839
Just watched this, pretty interesting. I do have a lathe I could use if I felt like I could take on another project, doesn't seem quite worth the time investment currently though.
https://www.youtube.com/watch?v=jAawhg6JtyY';

'>>196860
I made my own springs with this method since I have no lathe (Vid is in Spanish but it shows off how to do it easy)
https://youtu.be/6Z9LlRZCtPA?si=h0dPKFMMe-MQMc_S';

'this thing slaps (literally)';

'>>196895
>GBBR
>HPA adapter
kys';

'>>196895
>>196915
he has an anime sticker so it checks out';

'>>196895
>GBBR
>HPA adapter
Sta-
>Tranime
Rope now';

'why people hate hpa'ing gbb's here? Literally makes them more reliable, controllable and feed from much cheaper, lighter magazines with much greater capacity. Literally evens out odds against modified AEG's while still allowing for fun blowback.';

'>>197006
It takes away the mag manipulation aspect of GBB since you now just pull out and put in mags into that adapter like with an AEG, no bolt catch or anything like that.
Personally as an AEG player I see it this way.
>GBBRchads accept and even embrace their limitations for that final bit of realism, not caring they will be outperformed by basically any AEG, let alone HPA.
>HPAtards shell out silly amounts of money to chase that last percentile of efficiency, a show of character and their general tryhard attitude.
Also that hose is gay af lmao.';

'>>197022
I mean, I considered it as an option, because I want a cool blowback, while also not having such a huge limitation against players using AEG's and being able to shit out 150 bb's per mag that costs nothing vs 30 round mags that eventually add up more than cost of adapter and all else while weighting a ton and requiring additional gas refill ontop of reloading bb's. t. aegfag who considers that in the future';

'>>197006
Because it goes against the whole point of GBBRs. Fuck off from GBBs. We don't like your kind, HPAniggers';

'>>197022
Which 1911 MEU is that?
I've been looking at getting one of those myself.';

'>>197022
If the point of the gun was performance and performance only like you’re implying GBB with HPA really wouldn’t be the first choice.';

'>>197053
It's a WE, guy sold it for 30 eurobucks and a KWA G17 for another 30 eurobucks, so for 60 eurobucks total I got both of them and both came with a spare mag and pistol case each. A steal really. I know that the WE 1911s have a shitty reputation in regards of gas efficiency and whatnot, but I am not really looking for high gas efficiency on my sidearm I will draw once every 9 games anyway. Although when I used it I managed to empty the whole mag before running out of gas.
>>197059
Anon, I really hope you are not implying that the tiny amount of recoil your gay AAP/Hicapa has is this big equalizer that puts your HPAtapped GBB on par with any actual GBB or far out of league from engine-based HPA. Personally I think that a big point is that while you can take an AEG and really get it to run at near-HPA levels (to the extent that you won't really feel too much of a difference in most cases), there is a big hurdle you need to cross first, meaning that it usually is sensible people that get into that extend of AEG tuning, which means that they usually don't strife for it anyway since (at least where I live) people in general stick to or are limited to semi fire anyway. All while any retard can gut a MK18 and throw some HPA engine in, enabling him to fire BBs at 1,8j at 50rps.';

'>silverback MDR turns on battery protection if the temperature is too low if you don't disable it with a jumper

Sure would've been nice to know that Silverback considers 10 celcius too low and my gun gets unusable.';

'>>197006
>Evens the odds

Why are they now even? Are you shit or something?';

'Hey guys, haven't touched airsoft since hobbytron was big shit and VFC released their new "holy fuck 8mm M82A1 .50 monster!!!1!" so... probably 20 years?
Well, time has passed and I want to start having some fun at milsims with the gear I've acquired.
That being said- is Umarex any good in terms of AEGs? Was looking at getting a DD, KAC, or 416 and throwing a bunch of IRL shit on it for function under nods, as well as a fake suppressor.
Will I need to upgrade internals or batteries at all in terms of reliability in colder climates? Or for performance?
Any insight is much appreciated. Pic is from my last outing.';

'>>197122
>average gger mag holds 30 bb's
>cyma mag for less than quarter of the cost holds 130 and weights nothing
I dunno, it is relevant when you play in areas with thick foliage desu. Some people want cool blowback without 30 rounds per mag and constant reloading bb's into said mag and gas. EBB's unfortunately suck.';

'>>197147
>"cool blowback"
Kys, dumb frognigger. Stay away from GBBRs';

'>>197147
>want blowback cuz realism
>don't want 30-round realistic mags

These people don't want rifles. They want mini machine guns.';

'>>197159
>hurr people don't want rifles they want machine guns
you do realize almost everyone in airsoft uses midcaps in their power drills in regular weekend games, right? Capacity is a cope for bb ballistics being awful, and there is nothing wrong with that.
>want recoil cuz realism
want recoil cuz fun, there is no airshit providing realistic recoil.';

'>>197145
Don't know if they even still sell Nimh batteries but you want to avoid those in the cold. Go for Lipo/Life/Lion with a smart charger.
7.2v is a bit slow performance wise but 11.1v will burn your trigger contacts over time if you don't install a mosfet.';

'>>197186
Got it, I'll keep that in mind- thanks. Any worries about stock umarex gearboxes with a higher voltage system (mosfet or no)?';

'>>197147
>muh mag size
Get a P90 or or M249';

'>>197168
Agreed 100%, the only way realcap mags would work is if
>EVERYBODY has to use them and
>You're fighting cubical to cubical
The very moment a leaf is involved, you'll need to fire 20+ rounds into a single bush to connect with the guy behind it, not gunna work with realcaps.';

'>>195489
>walks on to field
>prepared perfect ambush
>shoots self in face
>refuses to elaborate further
>leaves
B A S E D';